Call our service and repair line on 028 3832 7888 or click here.
Over 100,000 car parts available
liqui moly

Synthoil Longtime Plus 0W-30 1L

Ref Code: l1150
* Images are supplied by the manufacturer for illustration purpouses only, for some products the image shown may not be of the exact part.

£15.95

FREE DELIVERY

Special Item
This is a non-stock item that we special order only as required. Delivery time is usually around Array.

Synthoil Longtime Plus SAE 0W-30 is a highly modern, fully synthetic, long-life engine oil which has been specially developed for the latest requirements for extending maintenance intervals. This engine oil is specified for gasoline and diesel engines with and without exhaust-gas turbocharging and pump-injector-systems. The combination of an unconventional synthetic basis with advanced additive technology has resulted in a guaranteed low-viscosity engine oil which is stable to high shear. This product prevents deposit formation and reduces frictional losses in the engine while protecting it from wear. The results are savings in fuel and an extended service life for the engine.

Properties

  • excellent wear resistance
  • outstanding engine cleanliness
  • reduces frictional losses
  • tested for turbochargers and catalytic converters
  • high shear stability
  • optimum oil pressure under all operating conditions
  • extremely low evaporation loss
  • rapid oil delivery at low temperatures
  • outstanding lubrication reliability
  • highest fuel economy

Specifications and approvals:

  • ACEA A1
  • ACEA A5
  • ACEA B1
  • ACEA B5
  • VW 503 00
  • VW 506 00
  • VW 506 01

Technical data
SAE class (engine oils) 0W-30
SAE J300
Density at 15 °C 0,856 g/cm³
DIN 51757
Viscosity at 40 °C 52,6 mm²/s
ASTM D 7042-04
Viscosity at 100 °C 9,6 mm²/s
ASTM D 7042-04
Viscosity at -40°C (MRV) < 60000 mPas
ASTM D4684
Viscosity at -35°C (CCS) <= 6200 mPas
ASTM 5293
Viscosity index 169
DIN ISO 2909
High temperature/high shear viscosity 2,9 mPas
ASTM D5481
Pour point -39 °C
DIN ISO 3016
Evaporation loss (Noack) 9,5 Gew.-%
DIN 51581
Flash point 220 °C
DIN ISO 2592
Total base number 10 mg KOH/g
DIN ISO 3771
Sulfate ash <= 1,6 g/100g
DIN 51575
Color number (ASTM) 2,0
DIN ISO 2049

Areas of application
Optimum for modern passenger vehicles with gasoline and diesel engines with and without turbochargers and also pump-injector-systems. Specially developed for VW motor vehicles with extended maintenance intervals from model year 2000 and the VW Lupo 3L TDI.

Application
The operating instructions of the vehicle and engine manufacturers must be followed.

Part Numbers

l1150

Brands

liqui moly

Delivery

All delivery times are an estimate. We are very selective about the couriers we use and although most orders are received on time, factors out of our control may delay a delivery. From time to time we will send an order directly from our supplier to you, if this is the case our normal courier will not be used and we can only give a rough delivery time, we will always let you know before dispatch if this will be the case for you. If paying by Paypal we can only dispatch the goods to the confirmed address on the account, if paying by card we can only dispatch the goods to the registered address on the card. It is your responsibility to check your order for damages before signing for it with the courier. We can not accept claims for damages if the delivery has been signed for.

Free Shipping only applies to the UK. If your item is shipping outside the UK please contact us if your order is shipping is going outside the UK and we can provide you with a price.

Returns

We must be notified of any returns within 7 days of the day after the reciept of goods, after this period we will not accept any returns. Returns without genuine cause, such as damage on delivery or bad fitment will not be entitled to a refund on delivery charges, return of these orders are the customers responsibility. In cases of bad fitment or damages we will require pictures emailed to us showing clearly the damage, or how the item does not fit.

Items marked as Special Order are ordered at your request and will not be accepted for return without genuine cause.

Any returns must come back in the same condition they left, we will not accept any returns from the customers courier if there has been damage in transit or the item or packaging is not as it was when dispatched from us. We will not accept returns on any parts that have been modified, primed, sprayed or fitted. All items must be in original packaging. If you have genuine cause to return an item please contact us within 7 days and we will arrange collection of the item and dispatch a replacement or issue a refund as quick as possible.

Cancellations

You are free to cancel your order with us at any time before it has been dispatched, once an order has been dispatched it can not be cancelled but may still be returned, please see 'Returns' above. Special Order items can be cancelled at any time before being dispatched to us from the manufacturer, once a special order has been dispatched to us it can not be cancelled but may still be returned, please see 'Returns' above.